SKF Bearings old

SKF BearingsSKF bearings are one of the leading bearing brands in the industry. Brammer is an authorised supplier of SKF bearings and supply the following ranges:

SKF Energy Efficient Bearings

  • Replaces conventional bearings in motors, pumps, compressors and conveyors
  • Uses 30% less energy
  • Maintains ISO standards and other operating criteria
  • Service life doubled when compared to SKF standard shield greased bearings
  • Reduced running temperature

SKF Deep Groove Ball Bearing

  • Accommodates moderate axial loads in both directions, in addition to radial loads
  • Effective sealing with rubber seals
  • Open & shielded versions (2Z) also available
  • Operating temperature from -10 to +100°C
  • Extra light, light and medium series
  • Most widely used bearing type
  • Suitable for high speeds

SKF Extreme Temperature Bearings

  • Very wide operating temperature :- VA201 -40°C to +250°C
  • Low friction
  • No oil or grease required
  • Manufactured using SKF graphite technology
  • Also available in flanged units
  • VA208 operating temperature also available :- VA208 -150°C to +350°C

SKF Solid Oil Bearings

  • Keeps the oil in position
  • Brings more oil to the bearing than grease
  • Keeps contaminants out
  • Makes maintenance unnecessary
  • No relubrication needed
  • Does not require seals
  • Environmentally friendly
  • Resistant to chemicals

SKF Insulated Bearings

  • Aluminium oxide coating
  • Virtually eliminates premature failures caused by stray electric currents
  • Available in ball and cylindrical roller versions
  • Increases machine uptime
  • Reduces maintenance costs
  • Provides an economical solution when compared with other insulation solutions

SKF Hybrid Bearings

  • Typically used in small electric motors
  • Bearing rings made from high grade bearing steel, rolling elements made from silicon nitride
  • Excellent insulating properties
  • Can prevent damaging electric currents from passing through the bearing
  • Can provide substantially longer service life

SKF Angular Contact Bearings

  • Operating temperature from -40 to +125°C
  • High strength & low noise glass fibre reinforced polyamide cage
  • Light and medium series available
  • Capable of supporting radial & axial loads in both directions
  • Often used instead of a pair of single row angular contact ball bearings
  • 25° Contact angle

SKF Self Aligning Bearings

  • Bearing is self-aligning
  • Insensitive to angular misalignment
  • Accommodates shaft deflection and misalignment
  • Cylindrical and tapered bore (K) available
  • RS1 Nitrile seal option
  • Suitable for use with SKF's SNL Housing

SKF Thrust Bearings

  • Accommodates axial loads
  • Must not be subjected to radial load
  • Separable for ease of mounting
  • Available for bore diameters from 3mm to 670mm

SKF Cylindrical Roller Bearings – Metric

  • For high radial load applications
  • Light and medium series
  • High load rating
  • High limiting speed
  • Reinforced polyamide cage
  • Various rib formations to suit different applications

SKF CARB Toroidal Roller Bearings

  • CARB toroidal roller bearings are a completely new type of radial roller bearing
  • CARB bearings permit smaller and lighter bearing arrangement designs, offering the same or improved performance
  • The rollers of the CARB bearing are self guiding and will always adopt the position where load is evenly distributed
  • Load carrying capacity is very high even when it has to compensate for angular misalignment or axial displacement
  • Often results in long service life
  • Suitable for us in the K7 plummer blocks for fan applications

SKF Spherical Roller Bearings

  • Bearing is self-aligning
  • Insensitive to angular misalignment
  • Accommodates combined loads
  • Produced in cylindrical and tapered bore
  • Bearings for vibratory applications available
  • C3 range suitable for use with SKF Fan Solution Programme

SKF Sealed Spherical Roller Bearings

  • Capable of carrying heavy loads
  • Not affected by normal angular misalignment and shaft alignment errors
  • Sealed at both sides with rubber seals, which retain grease in the bearing
  • Protected against contamination and moisture
  • Ready-to-mount and normally maintenance free
  • Available for shaft diameters from 25 to 220mm

SKF Spherical Thrust Roller Bearings

  • Bearing is self-aligning
  • Insensitive to shaft deflection and misalignment
  • Supports very heavy axial loads
  • Permits relatively high-speed operation
  • Accommodates radial loads in addition to simultaneous acting axial loads
  • Available for bore diameters from 60 to 1600 mm

Please contact us on 08447 36 36 65 to request further information on SKF bearings, or click here to request our catalogue.